Stage 2 Pumps & Controls
- 3 day course
- 5 dates available
- In-person course
- Book online
Looking for a more bespoke course?
Course Details
- 3-day course
- 9am – 4pm or as arranged by your tutor
- Candidates will receive a comprehensive set of course notes, light refreshments, and certificate of attendance
- The course has high practical content
Who should take this course?
Designed for those involved in the maintenance, management, and servicing of all types of Hydraulic systems across an extensive range of industry sectors where a range of Hydraulic Pumps and Associated Control Systems are in use.
Course Objectives
This course will:
- Take your overall knowledge and skills to the next level to enable you to better manage and maintain hydraulic systems with a range pumps and associated controls
- Ensure that you know the causes of pump failure in hydraulic systems and apply the necessary preventative measures
- Know the procedures to follow to carryout effective fault diagnosis and adjustments to improve performance
Skills Based
During the practical section of this course candidates will engage in and apply the following skills:
- Measuring pump flow & pressure and calculate pump efficiency
- Setting up the pump pressure relief valve
- Operating a Hi-Lo System and measuring Power consumption
- Setting up the pump controls; Pressure compensator and load sensing compensator
- Using the vent connection on a compensator
- Setting up a load sensing circuit
- Measuring performance of Torque Limiter Pump
- Setting up Pump with Electro-Hydraulic Proportional Controller
Knowledge Based
On completion of this course candidates will know:
- Basic principles of pump operation & control
- The recommended procedures to follow for installation and commissioning
- The range of control systems in use, setting up procedures and Q/P relationships
- The causes of pump failure and the preventative measures to be put in place
Entry requirements for this course
It is your responsibility to make sure you are booking onto the correct course with the NFPC.
We recommend you complete the Stage 1 Hydraulics course before attending this course.
One of our major priorities here at the NFPC is to ensure that you start your learning experience by attending the right course, ensuring that you build a firm foundation of knowledge and skills at the start of this vital journey.
We advise you to visit our FREE online self assessments to check your current knowledge levels before booking any course with the NFPC.
Frequently asked questions
You should find helpful information on this course page on what the course includes and who should take this course, however we recommend you visit our FREE Online Self Assessments to check your current knowledge levels before booking any course with the NFPC. On completion of our free self-assessments, we will recommend the right course for you to attend.
Once your booking has been confirmed and our bookings & customer liaison team have confirmed receipt of payment for your course, course joining instructions will be provided to you and all attendees on email which contains everything you need to know before attending the course, including course start times, directions to the NFPC and any other important information.
The National Fluid Power Centre is based at Turner Road, Worksop, Nottinghamshire S81 7AE. You can get directions here, or download our map here which includes further details on how to get to the NFPC by car or train. For nearby hotel accommodation, we have also included some helpful information here.
No, lunch isn’t provided however we will be providing light refreshments on the day. There are a number of supermarkets nearby along with fast food outlets for lunch.
For our courses that are available to book online, you will have the option at checkout to pay by Debit or Credit Card using Opayo secure payment processing, or pay by bank transfer. For existing NFPC customers who have an account with us, there is also the option to pay using Purchase Order.
If you have already booked onto one of our courses at the NFPC and you created an online account during checkout, you can amend your booking by logging into your account here. From your bookings page you can request a cancellation or request your course to be rescheduled.
Alternatively you can speak to our bookings team on 01909 504539 to make changes to your booking.
Meet the training engineers
Bill Norwood
Systems Training Engineer | Project Manager for Accumulator Competence
Arran Teasel
Mobile Systems Manager | Systems Training Engineer
John Hill
Systems Training Engineer | Project Manager for Pumps & Controls
Andrew Walker
Training Engineer
Adrian Hudson
Deputy Director | Control Systems Manager
Daniel Collins
Systems Training Engineer | Electro-Hydraulics, Pneumatics & Control
David Slater
Industrial Systems Manager | Systems Training Engineer
Darren Davis
Systems Training Engineer | Project Manager for CETOP Level 3 | Centre Learning & Development
Graham Rowley
Training Engineer | Project Manager for Stage 1 Hydraulics & CETOP H1 | Contamination Management
Similar Courses
-
Stage 2 Winch Hydraulic Systems
£1,190.00+VAT per person | £1,200.00+VAT from 1st August- 3 day course
- In-person course
- Available by request only
-
Stage 2 Proportional Hydraulics (Industrial)
£1,190.00+VAT per person | £1,200.00+VAT from 1st August- 3 day course
- In-person course
- Available by request only
-
Stage 2 Contamination Control Assessment
£395.00+VAT per person | £400.00+VAT from 1st August- 1 day course
- In-person course
- Available by request only
-
Stage 2 Hydraulic Troubleshooting
£790.00+VAT per person | £800.00+VAT from 1st August- 2 day course
- In-person course
- Available by request only
-
Stage 2 Accumulator Competence
£790.00+VAT per person | £800.00+VAT from 7th August- 2 day course
- 8 dates available
- In-person course
- Book online
-
Stage 2 Offshore Hydraulics
£1,480.00+VAT per person | £1,550.00+VAT from 1st August- 4 day course
- In-person course
- Available by request only
-
Stage 2 Industrial Hydraulics
£1,480.00+VAT per person | £1,550.00+VAT from 11th August- 4 day course
- 8 dates available
- In-person course
- Book online
-
Stage 2 Safe Management of Hydraulic Systems
£395.00+VAT per person | £400.00+VAT from 1st August- 1 day course
- In-person course
- Available by request only
-
Stage 2 Contamination Control Management
£395.00+VAT per person | £400.00+VAT from 1st August- 1 day course
- In-person course
- Available by request only
-
Stage 2 Mobile Hydraulics
£1,480.00+VAT per person | £1,550.00+VAT from 4th August- 4 day course
- 6 dates available
- In-person course
- Book online
DON’T JUST TAKE OUR WORD FOR IT
Take a look at what our customers have to say about us
The training delivered at the NPFC is first class. High quality presentations from knowledgeable experts, complimented by a well-equipped facility to support the practical learning. This has helped me to develop my hydraulics and electrical knowledge throughout my career. Kawasaki continue to use the NFPC to train our Engineers and technical staff to support in the development of their core competencies.
I am extremely grateful for the support the NFPC provided us in ensuring that our Agile Maintenance L&D programme was implemented on time and in full. The training provided and the customer focus delivered was second to none and the feedback received from all the delegates (58 in total) who benefited from a range of pneumatics, hydraulics and PLC courses was very positive indeed.
Webtec have been supporters of the NFPC for many years and the NFPC remains the ‘go to’ place for hydraulic training in the UK. They have outstanding facilities and attending courses at the NFPC is a mandatory part of our training programme for those involved in the design, sales or marketing of our hydraulic measurement and control products.
As a technical trainer I visited the NFPC seeking a hydraulic qualification that would evidence a level of understanding and add value to my own training. Starting at Level 1, knowledgeable instructors and excellent facilities enticed me back time and time again, until I recently completed the CETOP Level 3 in Mobile Hydraulics. Each level of training has improved my knowledge, collectively adding confidence and clarity to every situation.
Very grateful to have spent the last few days up at the National Fluid Power Centre Limited in Worksop completing their Stage 1 Hydraulics course. Would highly recommend it to anyone who wants further their knowledge of Hydraulics. Great facility with some fantastic equipment and staff, especially hydraulic guru Graham Rowley. Hope to be back to learn more soon!
The service and delivery of training by the NFPC to our offshore wind turbine technician apprentices has been outstanding. The knowledge and practical experience they gain in fully equipped, hi-tech workshops enhances the apprentices’ ability to align themselves with an essential part of their job. We have worked closely with John Savage and his colleagues to fine tune the program to give our apprentices the best possible start to understanding turbine hydraulic systems, nothing has been too much trouble. Every apprentice has been fully engaged with the training given and their feedback has been exceptional such as “Best training I’ve ever done” and “I’ve learned so much on this course”. Our experience of The NFPC has been excellent and we look forward to continuing working with John and his team and to developing our relationship with The NFPC in the near future.
