Test 1
Time limit: 0
Test Summary
0 of 10 Questions completed
Questions:
Information
This is a knowledge based benchmarking test to assess your current progression through the Hydraulic System Design course.
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must first complete the following:
Your Results
Your Results
Your time:
0 of 10 Questions answered correctly
Time has elapsed
You have reached 0 of 0 points – 0%
Earned Points: 0 of 0 – 0%
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
What does your score mean?
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
- Question 1 of 10
1. Question
The SI unit of pressure is the:
CorrectIncorrect - Question 2 of 10
2. Question
When fully extended, a 50mm bore cylinder with a stroke of 600mm would contain approximately
CorrectIncorrect - Question 3 of 10
3. Question
If a pump requires 22kW of power to drive it when producing a flow of 60 L/min at a pressure of 175 bar, its overall efficiency is approximately:
CorrectIncorrect - Question 4 of 10
4. Question
The displacement of a hydraulic motor is usually measured in:
CorrectIncorrect - Question 5 of 10
5. Question
The equivalent of the CE mark in post Brexit UK is:
CorrectIncorrect - Question 6 of 10
6. Question
1 kgf is approximately equal to:
CorrectIncorrect - Question 7 of 10
7. Question
The overall efficiency of a pump is affected by:
CorrectIncorrect - Question 8 of 10
8. Question
In general, the pump type with the highest overall efficiency is:
CorrectIncorrect - Question 9 of 10
9. Question
The ISO standard which covers hydraulic graphical symbols is:
CorrectIncorrect - Question 10 of 10
10. Question
According to the Centre for Compact and Efficient Fluid Power, the average power transmission efficiency of a fluid power system is approximately:
CorrectIncorrect
Time limit: 0
Test Summary
0 of 10 Questions completed
Questions:
Information
This is a knowledge based benchmarking test to assess your current progression through the Hydraulic System Design course.
You have already completed the test before. Hence you can not start it again.
Test is loading...
You must first complete the following:
Your Results
Your Results
Your time:
0 of 10 Questions answered correctly
Time has elapsed
You have reached 0 of 0 points - 0%
Earned Points: 0 of 0 - 0%
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
What does your score mean?
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
- Question 1 of 10
1. Question
The SI unit of pressure is the:
CorrectIncorrect - Question 2 of 10
2. Question
When fully extended, a 50mm bore cylinder with a stroke of 600mm would contain approximately
CorrectIncorrect - Question 3 of 10
3. Question
If a pump requires 22kW of power to drive it when producing a flow of 60 L/min at a pressure of 175 bar, its overall efficiency is approximately:
CorrectIncorrect - Question 4 of 10
4. Question
The displacement of a hydraulic motor is usually measured in:
CorrectIncorrect - Question 5 of 10
5. Question
The equivalent of the CE mark in post Brexit UK is:
CorrectIncorrect - Question 6 of 10
6. Question
1 kgf is approximately equal to:
CorrectIncorrect - Question 7 of 10
7. Question
The overall efficiency of a pump is affected by:
CorrectIncorrect - Question 8 of 10
8. Question
In general, the pump type with the highest overall efficiency is:
CorrectIncorrect - Question 9 of 10
9. Question
The ISO standard which covers hydraulic graphical symbols is:
CorrectIncorrect - Question 10 of 10
10. Question
According to the Centre for Compact and Efficient Fluid Power, the average power transmission efficiency of a fluid power system is approximately:
CorrectIncorrect
